×

ITB.e

3-phase Inverter 5-200 kVA

Industrial, heavy duty Inverter with galvanic insulation. Designed to Supply critical AC loads with stabilized continuous supply, in the Oil & Gas, Petrochemical, Power & Utilities applications.

  • Easy integration with existing Rectifier/Battery Charger
  • Inverter Transformer for AC/DC galvanic separation on the load side
  • High personalization grade, thanks to the modular layout
  • 16 Bit microcontroller control, digital control panel with history of alarms, full set of communications options
  • IGBT,PWM controlled inverter for high efficiency and low output THD.
  • Standard configuration for cost-effective, short lead time solutions.
  • Easy integration with external devices like, Distribution Panels, Bypass Transformers and Voltage Regulators.
  • Comprehensive set of communication ports, like RS232 / USB / RS485 available as standard, for total remote monitoring.
  • High-Speed last generation microcontroller, for best-in-class performance and reliability.
  • High personalization grade of the internal layout and user interface.
  • Active parallel configuration via CANBUS connection, dynamic parallel mode and sync control available.
  • SCR rectifier, overvoltage, undervoltage protection for reliable operation in all mains conditions.
  • Soft-Start for start-up overcurrent limitation.
  • Standard configuration for cost-effective, short lead time solutions.
  • Easy integration with external devices like Explosion Proof enclosure, Distribution Panels, Dropper Diodes, DC/DC Stabilizers.
  • Comprehensive set of communication ports, like RS232 / USB / RS485 available as standard, for total remote monitoring.
  • Support vented/sealed lead acid batteries and vented/gas recombination NiCd batteries.
  • Adjustable manual and automatic charging mode for maximum flexibility on operation.
  • High-Speed last generation microcontroller, for best-in-class performance and reliability.
  • High personalization grade of the internal layout and user interface.
  • Active parallel configuration via CANBUS connection.

Applications

Tech Specs

ITB.e: 3-phase Inverter 5-200 kVA

Rating (kVA) 5 10 15 20 30 40 50 60 80 100 120 160 200
Nominal power (kW) 4 8 12 16 24 32 40 48 64 80 96 128 160

Input

Rating 5 10 15 20 30 40 50 60 80 100 120 160 200
DC input voltage available input DC voltages vary with requested output AC voltages and rating (see the table below)
Output voltage 200÷220 Vac 110 Vdc (90÷160 Vdc range)
220 Vdc (180÷300 Vdc range)		  
380÷415 Vac 110 Vdc (90÷160 Vdc range)
220 Vdc (180÷300 Vdc range)		 220 Vdc
(180÷300 Vdc range)
Bypass input voltage 200/208/220 or 380/400/415 Vac 3-phase ±20%
(adjustable according to inverter output voltage)

Output

Nominal voltage 200/208/220/380/400/415 (optional 480) Vac 3-phase
Frequency 50/60 Hz (selectable)
Voltage regulation ±1% static; ±5% dynamic (80% load change), <40 ms recovery time
Overload capacity 125% for 10 min; 150% for 1 min; 200% for 100 ms
Harmonic Distortion THDv <2% linear load; <5% non-linear load

System

Isolation Battery to load isolation included; input/output isolation available with additional bypass transformer
Dimensions WxD (mm) Height is 2100 mm, width and depth vary with input voltage and rating (see the table below)
Rating 5 10 15 20 30 40 50 60 80 100 120 160 200
Input voltage 110 Vdc 600x800 800x800 800x800*
100x800**		 100x800 1000x1000 1400x1000 - - -
220 Vdc 600x800 600x800*
800x800**		 800x800 800x800*
1000x800**		 1000x800 1000x1000 1400x1000
Maximum weight (kg) 325 370 514 440 520 570 640 690 750 850 880 920 1020
Cooling Forced ventilation
Efficiency 94%
Colour RAL 7035
Protection degree (IEC 60529) IP20 (other options)

Environmental

Operating temperature -10 °C ÷ +40 °C
Storage temperature -20 °C ÷ +70 °C
Altitude <2000 m (derating according to EN 62040-3)
Audible noise at 1 meter (dBA) <65÷75
Options Associated distribution panels; emergency line isolation transformer and AC/AC voltage stabilizer;
parallel redundant, hot-standby, load-sync configuration; earth fault alarm; fan monitoring and alarm;
redundant ventilation; additional RFI filters; top cable entry.

User Interface

Front panel LCD display, LED mimic, keyboard. Customisable status and alarms LED set
Connectivity SPDT contact relay card, RS232 serial port
Optional: RS485 ModBus-RTU serial port, ModBus to PROFIBUS DP adapter, Ethernet SNMP/WEB adapter,
remote monitoring software, up to 2 additional SPDT contact relay cards.

*400 Vac **208 Vac

TOP });