×

UPSaver®

Maximum energy savings together with high quality power for your data center? Now it’s true with Borri UPSaver® the new generation 4.0 UPS.

UPSaver® is a complete, very high efficiency, multi-function and fully adaptable power protection system for your mission critical application. The flexibility of the system is achieved by using power modules, which can be configured as either stand-alone units or modular systems.

From Uninterruptible Power Supply to Uninterruptible Power Saver: a permanent saving system continuously monitoring the mains to guarantee high quality power to your ICT equipment at minimum energy usage.

  • Certified efficiency up to 99.5%
  • Modular and scalable up to 12.8 MW
  • Hot system power growth
  • Minimum maintenance needs
  • Whatever your mission critical application is we provide you the right system
  • 4 level modularity for maximum flexibility

    Its modular design allows easy system resizing by addition of power modules. Maintenance operations can be done without powering down the system and without switching to bypass line.
  • Continuous savings

    Certified maximum efficiency in all modes of operation: 96% in double conversion mode, thanks to patented Green Conversion technology, 97% in active filtering mode, 98% in ECO mode and 99.5% in UHE mode. With smart-parallel control unnecessary modules are switched off to further enhance system efficiency.
  • Low environmental footprint

    UPSaver® can feed at maximum efficiency any load up to unit power factor and its transformer-free design makes it lighter and more compact for a higher environmental sustainability.
  • 4 UPS in one for maximum versatility

    UPSaver® can operate in all International Electrotechnical Commission classified modes of operation: double conversion (VFI), active filtering (VI), ECO mode (VFD) and Ultra High Efficiency (VFD).
  • Low maintenance cost

    Green Battery Management and Green Conversion technology save battery life, by mitigating the major root causes of battery ageing, such as ripple current and floating charge micro currents. UHE mode of operation dramatically increases the duration of wearing components.
  • Maximum safety

    UPSaver® comes with both detection circuitry and input terminal disconnection contactor for maximum operator safety.
  • UPSaver® is based on 100 kW or 200 kW unit modules and an I/O module for cable connection, system bypass and user interface. Unit modules have removable sub-modules for easy maintenance and low MTTR.
  • Configuration options include N+R redundancy, distributed and centralized static bypass.
  • The I/O module is designed to allow unit modules hot connection and disconnection without switching to bypass line.
  • Users can set any of its 4 modes of operation or activate UPSaver® strategy algorithm, which dynamically sets the best one according to mains conditions, to provide critical loads with high quality power at the highest efficiency.
  • Unit input power factor, input THDi <3%, programmable soft start and hold-off features make UPSaver® your Genset’s best friend.

Tech Specs

UPSaver® UPS 100 kW-12,8 MW

Input

Connection type Hardwired 4w (rectifier), 4w (bypass)
Nominal voltage 400 Vac 3-phase with neutral (rectifier), 380/400/415 Vac 3-phase with neutral
Voltage tolerance -20%, +15% (rectifier), ±10% (bypass)
Frequency and range 45/50/60 Hz
Power factor 0.99
Current distortion (THDi) <3%

Output

Connection type Hardwired 4w
Nominal voltage 380/400/415 Vac 3-phase with neutral
Frequency 50/60 Hz
Voltage regulation (VFI) ±1% static; dynamic: IEC EN 62040-3 Class 1
Power factor Any power factor up to 1, without power derating
Overload capability Inverter: 101÷125% for 10 min; 126÷150% for 1 min; bypass: 150% continuous, 1000% for 1 cycle
AC/AC efficiency Up to 99.5%
Classification as per IEC EN 62040-3 VFI-SS-111

Environmental

Operating temperature 0°C ÷ +40°C
Storage temperature -10°C ÷ +70°C
Altitude <1000 m
Audible noise at 1m (dBA) <50 (UHE)

System

Protection degree IP 20
Colour RAL 9005
Installation layout Wall, back to back and side by side installation allowed
Accessibility Front and top access, bottom and top cable entry
Use in parallelUp to 8 UPS, for a total of 12.8 MW

Standards and certifications

Quality assurance, environment,
health and safety
ISO 9001:2008, ISO 14001:2004, GOST, BS OHSAS 18001:2007
Safety IEC EN 62040-1
EMC IEC EN 62040-2
Test and performance IEC EN 62040-3
Protection degree IEC EN 60529
Marking CE

Connectivity and function extensions

Front panel Touch screen display
Remote communicationIncluded: serial RS232 and USB; input terminal block for remote emergency power off (REPO), battery circuit breaker aux. cont., external maintenance bypass circuit breaker aux. cont.
Optional: input terminal block for diesel mode aux. cont., ModBus-TCP/IP (Ethernet); ModBus-RTU (RS485); ModBus-RTU to PROFIBUS DP adapter; SPDT contact relay board; UPS managing and server shutdown software
Optional function extensions Isolation transformer, external maintenance bypass, custom battery cabinets, wall-mounted battery fuse switch box, battery thermal probe, parallel kit, load-sync for single UPS and load-sync box (2 UPS systems), tripping coil for bypass disconnector for UPSaver FPU

UPSaver® Stand Alone Units FPU* (Fixed Power Unit)

Nominal power (kW) 100 200
UPS dimensions WxDxH (mm) 460x920x1690 800x950x2100
UPS weight (kg) 360 720

* A Fixed Power Unit (FPU) is made of a 100 kW or 200 kW Basic Power Unit (BPU) plus all circuit breakers and control logics for use in stand alone configuration

UPSaver® 100 kW Modular Units GPU* (Growing Power Unit)

Rating 200 300 400 500 600
N nominal power (kW) 200 300 400 500 600
N+1 nominal power (kW) 100 200 300 400 500
UPS dimensions WxDxH (mm) 1420x920x1690 1880x920x1690 2340x920x1690 2800x920x1690 3260x920x1690
UPS weight (kg) 800 1150 1500 1850 2200

* A 100 kW Grow Power Unit (GPU) is made of many 100 kW Basic Power Units (BPU) plus an I/0 module including all circuit breakers and control logics required for use in modular configuration

UPSaver® 200 kW Modular Units GPU*

Rating 400 600 800 1000 1200 1400 1600
N nominal power (kW) 400 600 800 1000 1200 1400 1600
N+1 nominal power (kW) 200 400 600 800 1000 1200 1400
UPS dimensions WxDxH (mm) ** 2350x970x2100 2950x970x2100 3900x970x2100 4500x970x2100 5100x970x2100 6800x970x2100 7400x970x2100
UPS weight (kg) ** 1660 2260 2920 3590 4190 4960 5560

* A 200 kW Growing Power Unit (GPU) is made of many 200 kW Basic Power Units (BPU) plus a I/0 module including all circuit breakers and control logics required for use in modular configuration

** Data refer to distributed static bypass configuration with modular battery

TOP